The LCT 550 is the first and only large-diaphragm studio microphone ever to achieve 0 dB (A) self-noise*. That makes it possible to capture even extremely weak signals with great precision and detail.

The Austrian-developed LCT 550 sets new standards in terms of more than just self-noise. A dynamic range of 140 dB (A) guarantees the best-possible results even in challenging settings. The three pre-attenuation levels (0 dB, -6 dB and -12 dB) increase maximum SPL to as high as 155 dB (A). The LCT 550 also offers a clipping history as well as an auto-attenuation mode that automatically switches to the next level of attenuation if the signal is too strong. For the elimination of structure-borne noise, there are two high-pass filters: 80Hz, 12dB/octave and 160Hz, 6dB/octave.

Manufacturing tolerances have been minimized thanks to highly precise calibration of the capsule and the electronics – which means that any two microphones from this series, set>   Features LEWITT LCT 550
A perfect match – highly precise calibration of capsule and electronics means that any two microphones from this series will always form a matched pair at +/- 0 dB
Precise transient response thanks to the 3-micron-thin, gold-layered, low-mass, 1-inch Mylar diaphragm
Extraordinary sensitive: capture even extremely weak signals with great precision and detail
Cardioid polar pattern for effective rear sound rejection
0 dB (A) self-noise from electronics and circuitry *
140 dB dynamic range Max. SPL of 155 dB (A)
Immune to electromagnetic interference thanks to transformerless preamplifier circuitry
Illuminated user interface for quick and easy handling in dark environments
Noiseless pushbuttons for attenuation and low-cut selection
Automatic Attenuation and Clipping History mode
Rugged zinc die-cast body
Internal shock mount for maximum reduction of structure borne noise
Corrosion-resistant gold-plated 3-pin XLR output connector
Top applications LEWITT LCT 550
Classical instruments and ensembles
Ambitious stereo recording techniques (XY, ORTF, AB, )
Vocals & background vocals
Acoustic instruments (strings, guitars, piano and similar)
Drum & percussion overhead
    Tech data
Acoustical operating principle pressure gradient transducer, externally polarized Diaphragm 3 micron gold sputtered Mylar Transducer Ø  25,4 mm / 1 inch Polar pattern  cardioid Frequency range  20 to 20.000 Hz Sensitivity  36 mV / Pa (-29 dBV), +/- 0 dB @ 1 kHz Signal / noise ratio  91 dB (A) Equivalent noise level 0 dB (A) self-noise from electronics and circuitry
3 dB (A) according to IEC 60268-1 due to Brownian motion Dynamic range of FET mic. Amp.  140 dB (A) Max. SPL for 0,5 % THD 143 dB, 0 dB pre-attenuation Pre-attenuation pad  6 dB, 12 dB, switchable Low cut 12 dB / octave at 80 Hz Rated impedance  < 150 ohms Rated load impedance  > 1.000 ohms Supply voltage  48 V +/- 4 V Current consumption  5,5 mA Enclosure  Zinc die cast Connector  gold plated 3-pin XLR Dimensions 158 x 52 x 36 mm / 6,22 x 2,04 x 1,42 inch Net weight  425 g / 14,9 oz Giá sản phẩm trên Tiki đã bao gồm thuế theo luật hiện hành. Bên cạnh đó, tuỳ vào loại sản phẩm, hình thức và địa chỉ giao hàng mà có thể phát sinh thêm chi phí khác như phí vận chuyển, phụ phí hàng cồng kềnh, thuế nhập khẩu (đối với đơn hàng giao từ nước ngoài có giá trị trên 1 triệu đồng).....